Where to find the part number of a Kwikee step?

Where to find the part number of a Kwikee step?

HEET To identify the standard step part number or series number, look for the Kwikee label under the step on the mounting surface that attaches to the coach. The label will show the part number of the step. You may have to have the step extended to see the label. Below are a couple examples of different labels used on the steps. EXAMPLE 1:

How to identify common encoder signal issues?

How to Identify Common Encoder Signal Issues. When encoder signals appear incorrect, the most common response is to assume the fault lies with the encoder. However, many issues can be the result of mechanical or environmental factors such as lose couplings, shorted wires or other system related issues.

What should the waveform of an encoder be?

With the exception of the index channel, the channels of an incremental encoder code disc are patterned to generate a signal with a 50-50 duty cycle (see below). That means that 50% of the waveform should be high (0° to 180°) and 50% should be low (180° to 360°).

How is the index channel used in an encoder?

The use of a channel and its complement (e.g. A and A-Not), two signals 180° out of phase, provides a method for filtering out noise spikes. The index channel is designed to generate a single pulse per revolution, but its position relative to the other channels varies depending on the system.

Why are the steps on my Kwikee not working?

There are several possibilities that could do what you have now. One is the motor failed, another the control board has failed, or for some reason the motor does not know the steps have reached the stored position and the motor has not powered down.

What does warm motor mean on Kwikee step?

With Kwikee that is detected by the control board when the motor stalls due to reaching the stops and no position switch is involved. A warm motor would seem to imply that the power didn’t shut off like it should when the step reached the stop in the store position.

What are the symptoms of a broken Kwikee step?

In my experience the most common symptoms of a broken Kwikee step are either nothing happens when the door opens and closes, or the wrong thing happens (usually accompanied by an unwanted noise). So continuing down that path, here is the approach I took to troubleshooting my step problems.

There are several possibilities that could do what you have now. One is the motor failed, another the control board has failed, or for some reason the motor does not know the steps have reached the stored position and the motor has not powered down.

With Kwikee that is detected by the control board when the motor stalls due to reaching the stops and no position switch is involved. A warm motor would seem to imply that the power didn’t shut off like it should when the step reached the stop in the store position.

How long does a Kwikee step finish warranty last?

The warranty is effective as of the date of sale to the original purchaser and extends two years for parts and labor on step mechanisms and one year for step finish. Since it is the responsibility of the owner to verify the original purchase date, Kwikee recommends that a bill of sale or sales receipt be kept for that purpose. 4.

How does the Kwikee RV step control unit work?

Unit wires steps to RV and works with motor (sold separately) to automatically extend and retract steps when the RV door is opened and shut. The control unit burned out after 7 months. Just got around to testing it (Weather)according to Kwikees owners manual.

When to replace Kwikee 9510 step control unit?

The Kwikee 9510 Control for IMGL/9510 Step Control Unit is designed to be used with the magnetic door switches (normally open). The control unit is designed to be replaced on the IMGL step units that were manufactured from 2006 to present.

How tall are the steps on a Kwikee RV?

Dimensions: 6-3/4″ long x 3-1/8″ wide x 1-1/16″ tall The ignition override feature is a safety feature that will retract your steps if the RV’s ignition is sensed. This way, if you forget to stow your steps, they will retract automatically to prevent damage while traveling.

How does the Kwikee step 32 series work?

Product description. The Kwikee Step 32 Series Double Electric Step by Lippert Components automatically extends when you open your RV door and retracts when you close your RV door. The power step features an automatic shut-down if the step strikes an obstacle. Weatherproof wiring and connectors prevent shorts and corrosion in the system.

What makes a Kwikee power step so good?

The power step features an automatic shut-down if the step strikes an obstacle. Weatherproof wiring and connectors prevent shorts and corrosion in the system. Motor, Control Unit and Switch Kit included. Kwikee brand power steps have been the favorite of RVers for more than 40 years!

Where do I find the Kwikee step number?

To identify the standard step part number or series number, look for the Kwikee label under the step on the mounting surface that attaches to the coach. The label will show the part number of the step. You may have to have the step extended to see the label.

When to replace the motor on a Kwikee step?

This is the direct replacement for the older model Lippert number, number 366043.And this motor will automatically shut down if the step does strike an obstacle.