T
The Daily Insight

How many motor mounts does a 2004 PT Cruiser have

Author

Mia Walsh

Published Apr 20, 2026

The PT Cruiser has three motor mounts.

Do I need to replace all 4 motor mounts?

YES, you should replace all motor mounts at the same time for better dynamic balancing.

How much are motor mounts for a PT Cruiser?

Chrysler PT Cruiser Engine Mount Replacement Cost Estimate. Labor costs are estimated between $106 and $133 while parts are priced at $288.

How many motor mounts do you need?

Summary. To recap, most cars have between three and four motor mounts, which serve the important and unique purpose of absorbing vibrations from the engine’s internal combustion process. Some motor mounts may also help to support the weight of your car’s engine.

Do motor mounts affect acceleration?

Broken or worn engine mounts may cause the engine to slide around in all directions in the engine bay, something that is particularly noticeable when accelerating or driving at high speeds.

How many motor mounts are on a vehicle?

How does the engine mount work? There are typically two or more engine mounts in a vehicle.

How much does it cost to replace a motor mount?

The average replacement cost for an engine mount is anywhere from $200 to $600. The cost of the parts and labor can vary, depending on the make and model of your vehicle. The parts cost will likely be between $50 and $150, while the labor costs will be between $150 and $450.

How many motor mounts are in a PT Cruiser?

The PT Cruiser has three motor mounts.

Are motor mounts hard to change?

Replacing engine mounts isn’t too difficult but it can be fiddly. Always check for obstructions between engine and wall (such as crimped AC lines or radiator hoses) before you start. … Raise just far enough to access the engine mounts. Loosen the engine mount bolts using a long extension and universal joint.

What does the PT mean in PT Cruiser?

PT stands for “Personal Transport” or “Personal Transportation”. PT was the PT Cruiser’s product code. Eric Brandt, an Autotrader.com writer, recalls hearing that PT stood for “Plymouth Truck”; the PT Cruiser was originally planned as a Plymouth.

Article first time published on

What do bad motor mounts sound like?

One of the most common signs of a failing motor mount is what we call “impact noises” that you will hear coming from the engine bay. You may hear significant clunking, banging or rattling, and that means the engine could be loose at the point of one or more of the motor mounts.

Can bad motor mounts cause rough idle?

Weak or broken mounts can’t hold the engine tight in the engine compartment and creates a vibration at idle.

How often do motor mounts need to be replaced?

In general, motor mounts do not have a scheduled replacement but should last between 5 to 10 years before dry rot or breaking from age-related failure. Motor mounts can get broken from slamming the vehicle, gears over-revving, and letting out clutch or power braking the engine before takeoff.

Do motor mounts affect steering?

engine-mounted belts that run items like your power steering pump and water pump can also be damaged or broken by an engine that is loose on or unattached to its mounts. damage to these belts can affect the operation of your steering or cooling systems, both with very bad consequences.

How long does it take to fix motor mounts?

My dealer states 7 hours to replace Dogbone, Front, and Side mount. My labor guide shows a time of just over 6 hours. There would appear to be some overlap on this job, so I bet if you were to call around you could get a better deal.

Can motor mounts cause check engine light?

Bad motor mounts shouldn’t cause a check engine light to come on. On the outside chance that do cause the engine light to come on it should set a knock sensor code due to the engine moving/ shifting position and causing a thump that the knock sensor picks up and will adjust timing.

Can engine mounts be tightened?

A torque wrench is the tool of choice for tensioning the engine mount fasteners. For the final adjustment (after alignment and load equalization have been done), use two wrenches/spanners: one to hold the adjusting nut steady and the other to tighten the lock nut. This will ensure proper tension between the nuts.

Can you tighten a loose motor mount?

Thread in the mount bolts, but don’t tighten them. Lower the engine. This makes it easier to align the motor mount. Finish tightening the bolts once you have lowered the engine.

How many motor mounts does a 2005 Saturn Vue have?

Hello – for your model Saturn with the V6, there are 6 motor/transmission mounts in total.

How many motor mounts does a 2008 Saturn Aura have?

FITS: 2007-2008 SATURN AURA (3.5L, V6) — SET OF 4 ENGINE & TRANSMISSION MOUNTS.

Do motor mounts need to break in?

Re: Break in period on motor mounts? Depending on how much driving you do, they should soften up over the next few weeks. If you still don’t like them after you’ve put 500+ miles on them, then you may never like them.

Can a bad motor mount cause shaking?

The first obvious sign of bad motor mounts is; excessive engine vibration. Motor mounts are made to hold your engine in place and absorb vibration. If your engine is shaking in place, it’s probably a sign of bad motor mounts.

Where do you jack up a PT Cruiser?

Place jack directly underneath one of the two built-in jacking locations on the PT Cruiser. The jacking locations are at the front and the rear of the car. You can identify them by looking for the triangular cut out symbol. Use the jacking location closest to the tire that needs to be changed.

Do PT Cruisers have a lot of problems?

Some of the most common problems with the PT Cruiser involve the vehicle’s engine. … Stalling and difficulty starting are other common PT Cruiser engine complaints. While some of these issues may be covered under an extended powertrain warranty, engine repairs on older vehicles can be costly.

Is the PT Cruiser the worst car?

Although they try to distract you with the unique retro styling, there is no way you can ignore the engine and transmission issues that plague the car. … This rounds out the many reasons why the PT Cruiser is, without a doubt, one of the worst cars ever made.

Why did they discontinue PT Cruisers?

“The only people who were really buying it for much of the last decade were the rental car companies because it was cheap.” But after government intervention in Detroit drove up the price, the rental companies backed off. Then, in 2010, Chrysler discontinued the PT Cruiser line altogether.

What can broken motor mounts cause?

In addition to causing damage to vital engine components, broken motor mounts can also cause damage to various engine drive belts and engine hoses. Severely damaged or broken motor mounts can cause engine belts and hoses to break and/or snap if the engine is allowed to rotate or turn excessively.

Are motor mounts expensive to fix?

Replacement engine mounts and bolts don’t always cost a lot; they can run from as little as $50 to as much as $200 at parts stores, depending on the vehicle, though liquid-filled mounts are more expensive.

What happens when the motor mounts go bad?

Worn, damaged, or broken motor mounts can cause clunking, banging, and other impact type sounds as a result of the weight of the engine shifting around. … If the rubber or vibration dampening parts of the motor mount wear out or break, it will significantly reduce the mounts’ ability to absorb engine vibrations.

What does it mean when your car shakes while parked?

If the vehicle shakes or the engine shudders a lot when stopped at a stoplight, or when parked with the engine idling, it might indicate the motor mounts or transmission mounts are damaged or broken. … If the shaking decreases, it’s a strong indicator the engine’s motor mounts need to be inspected by a mechanic.

Why does my car shake when idle?

While a shaky idling car can certainly feel like an earth-rumbling tremor, it can also indicate a problem with the engine. One common cause of shaking while idling can be loose engine mounts. … Alternatively, a car that shakes when idle may have faulty fuel injectors, worn-out spark plugs, or a bad timing belt.